skip to Main Content
630.920.3300 - South & Western Suburbs | 630.601.8390 - North & Northwest Suburbs
Painting Tips And Techniques For Your Wheaton DIY Interior Or Exterior Painting Project

Painting Tips and Techniques for Your Wheaton DIY Interior or Exterior Painting Project

In this article, we are going to go through several tips and techniques that are going to help you with your DIY interior painting project in Wheaton. These tips are meant to ensure that your painting project goes as smoothly and quickly as possible, with superb results.

1. Keep a wet edge in order to avoid lap marks

Have you ever noticed that on some walls, you sometimes have stripes of dried up paint that stand out in color? Those are called lap marks, and they are the result of adding a layer of fresh paint over paint that has already dried. It may sound like something that is easily avoidable, but in some cases (latex paints in particular), paint can actually dry up in under a minute!

The solution for this is to use a technique known as the wet edge. Basically, you have to cover the wall with paint across its entire height, and then move slowly across it horizontally, always maintaining an overlap between each stroke of the paint. Make sure that you face the open side of the roll towards the parts that have already been painted over. This will ensure that there is less pressure on the already painted areas, and that you will not have ridges when you finish your project. You also want to make sure that you keep the roller wet with paint throughout the entire process.

2. Mix the right amount of paint for color consistency

The next technique we’re going to discuss is called “boxing”. When doing DIY interior painting, you have to keep color consistency in mind. This should be easy to do if you do not mix paints and only use one color, right? Unfortunately, many homeowners notice discolored spots and a lack of uniformity, even if they use the same color and same paint brand for their entire project. This is due to the nature of the paints themselves, which may vary from one paint can to another.

Boxing is the solution here. Grab a large container, something like a 5-gallon bucket, and mix the approximate amount of paint that you will need for the job. As a general rule of thumb, it’s better to overestimate than underestimate when boxing—you can always pour any leftover paint back in its original bucket and store it for later use.

3. Use tape to get a perfect edge over your wall trim

Before you start your DIY interior painting project, you’ll want to make sure that you do not stain any surfaces adjacent to the wall, such as the trim, ceiling and floor. For this, you can use a simple roll of painter’s tape.

However, the main advantage of this technique comes after the project is near completion. After you are finished painting, you will likely have some spillover on the tape. Now, if you remove the tape right away, you will not get a perfect edge between the wall and the trim, because the paint is still wet and gummy. Instead, you should wait for at least 24 hours, or until the paint is dry enough, and then use a box cutter or a utility knife to cut a straight edge.

The Is Your Interior Painting Project or Exterior Painting Project Too Much of a Hassle?

If this sounds like too much of a hassle, you can call a professional painting company that handles interior painting and exterior painting. If you are looking for the best residential painting company in Wheaton, Illinois, then Prime Time Painting is the company to call. We use only the highest quality of paints and deliver professional results every time. Contact us today for a free estimate!

Back To Top